Posted by Paulo Barbosa on


The growing automation device is a great assistant for a city farmer, which help you get a harvest easily because the OverGrower controls all the necessary parameters and saves you the extra trouble of hydroponic system!

Each OverGrower is designed for one growing zone or for one type of plant that is at the same growth stage.
The device can control the growing area from one small hydroponic system to a farm about the size of 10 000 m2!
Special conditions for the place of growing plants is not required.
Entrust the growing of plants to OverGrower! The device has a system of 8 sensors, takes into account all parameters of the nutrient solution and the environment and corrects them, creating optimal conditions for the best growth and development of a plant. The OverGrower is embedded in the ready-assembled hydroponic system.











Mixing components of the solution occurs by based on the requirements of the plant growth stage. It is possible to use fertilizers any firms, destined only for hydroponics.
Regulation of acidity of solution occurs by making special pumps with acid or alkali. Based on these pH sensors, pumps control the level of acid-base balance to optimum values.
Regulation of nutrient solution of trace elements is performed by making a proportional multi-nutrient of fertilizers using the pumps. Based on the TDS sensor indications, pumps, proportionally adjusted to mineralization level of desired value indicating a concentration measurement units «ppm». It is possible to use of 1-, 2- and 3-component of fertilizers.
Solution temperature
Solution temperature
The decrease of temperature
of the nutrient solution in a tank
Air temperature
Air temperature
It’s possible to connect
an air conditioner or an air
heater for air controls
Air humidity
Air humidity
Automatic activation
of an air humidifier according
to the specified settings

Control and monitor of lamps
in the mode of supplementary
lighting or completely artificial
lighting as scheduled

A water level in a tank
A water level in a tank
Controlled by a level
sensor in a tank; monitor of water
pump for water supply
CO2 concentration
CO2 concentration
A CO2 supply according to
preset settings, automatic
activation of air ventilation
to reduce carbon dioxide levels.

We have developed a new generation of hydroponics and aeroponics growing automation systems.
OverGrower® opens up new possibilities for industrial plant growth.
Universal integrated automation for city farms, greenhouses, small, medium and large agro-industrial complexes.


Ability to control with AirGrow® wireless technology.
AirGrow® Base Station - a wireless access point connects to the device and controls the AirGrow® Module radio modules at a distance of up to 100 meters (up to 500 m with direct visibility).
Wireless control of devices, devices, sensors, pumps for simple and effective integrated automation of city farms and greenhouses.

Easy customization of automation to your needs. Connect an unlimited number of devices in any order.
Several mortar units, sensor blocks, sockets, pumps and other various monitoring and control devices can be connected to the device.

The hydroponics automation complex is a modular system. Enhanced OverGrower® capabilities with additional sensor and control elements while scaling production.

Improved technology allows one OverGrower® device to control several growing zones and climatic zones, creating optimal conditions for growing plants!
Comming in 3 weeks

Share this post

← Older Post

Leave a comment

Please note, comments must be approved before they are published.


View full product info